ESAB Aristotig255 AC/DC DTE 255, Инструкция по эксплуатации

Страница: 12 / 20

− 12 −
dpb1d1ea
6.6 TIG welding
In TIG welding the torch trigger has three different functions:
S Two − stroke
S Four − stroke
S Four − stroke with the possibility to shift between two currents (shift function).
6.6.1 Adjusting the control panel for TIG welding
S Connect the TIG burner and the earth lead into the OKC outputs E and F, (for
central connection: terminals P and F).
S Set switch (1) to the desired position.
If a foot
− operated remote control unit is to be used, set switch (1) to position
two − stroke.
NB. For direct current control over the foot − operated remote control unit, the
potentiometer (7) and (10) must be set to position 0.
A hand − operated remote control unit can be used for both two − stroke and
four − stroke to set the welding current.
S
Select the desired striking method using switch (2).
S Adjust the welding current using potentiometer (8).
S Select the desired type of pulsing using switch (3).
S For the shift function/pulsing, adjust the lower current value using potentiometer
(9).
GB