ESAB AristoFeed 30- 4, Инструкция по эксплуатации

Страница: 9 / 26

-- 9 --
bm29d1ea
WARNING!
Rotating parts can cause injury, take great care.
WARNING!
There is a risk of tipping if the wire feed unit is fitted with a counterbalance arm. Secure the
equipment, especially if used on an uneven or sloping surface.
When moving the equipment use intended handle. NOTE! Never pull on the gun.
6.1 Connections and controls
1 Control panel
(see respective instruction manual)
6 Connection for welding current from the
power source (OKC)
2a
2b Connection for remote control adapter
Connection for AristoPendant U8. 7 Connection for the control cable from the
power source
3 Connection with ELP* for cooling water to
the welding gun-- BLUE
8 Connection for cooling water to the power
source (cooling unit) -- RED
4 Connection for cooling water from the wel-
ding gun -- RED
9 Connection for cooling water from the po-
wer source (cooling unit) -- BLUE
5 Connection for the welding gun 10 Connection for protection gas
NOTE! Cooling water connections only available on certain models.
* ELP = ESAB Logic Pump, see point 6.2.
GB