ESAB AristoFeed 30- 4, Инструкция по эксплуатации

Страница: 8 / 26

-- 8 --
bm29d1ea
5.3 Connection of multiple wire feed units
When connecting multiple wire feed units (maximum 4), use wire feed units without
control panel (M0) and with control box AristoPendant U8.
Two feed units are to be connected according to the picture.
When connecting more than two feed units, an authorised ESAB service technican
must perform the installation.
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 3 . Read through before you start using the equipment!
WARNING!
Assure that the side panels are closed during operation.
To prevent the reel from sliding off the hub: Lock the reel in place by
turning the red knob as shown on the warning label attached next to
the hub.
WARNING!
GB