Erskine Attachments VP48PD, Руководство оператора по техническому обслуживанию и информации о запасных частях

Страница: 8 / 24

8
USER’S MOUNTING INSTRUCTIONS
7. Connect the hydraulic quick couplers from the
attachment to the loader auxiliary couplers and
case drain.
IMPORTANT: Wipe the ends of the hydraulic
quick couplers (both lead and loader) with a rag
to
remove any possible contamination.
Contamination can cause hydraulic components
to fail and is not covered under warranty.
IMPORTANT:
Make sure the quick couplers are
fully engaged. If the quick couplers do not fully
engage, check to see that the couplers are the
same size and brand. Do not force the quick
couplers together.
NOTE:
See the loader’s operator’s manual for
auxiliary hydraulic specifications and connection
instructions.
NOTE: Attachment is shipped with 12FJX
(1-1/16
” Female JIC Swivel) fittings on the ends
of the lead hoses.
8. Make sure the hoses are properly routed to fit
your specific loader. If the hoses are not routed
correctly, hoses may get pinched or rub on tires.
Be sure to check the hose routing through the full
range of intended motion of the attachment
before operating it.
More than one routing may be acceptable
depending on the loader. Pick the routing that
best suits your loader.
IMPORTANT: Proper hose routing is the
responsibility of the owner and/or operator.
Pinched or stretched hoses are not covered
under warranty.
Mounting is now complete and you are ready to use
the attachment. Use reverse order of above
instructions to dismount the attachment from the
loader.