8
USER’S MOUNTING INSTRUCTIONS
7. Connect the hydraulic quick couplers from the
attachment to the loader.
IMPORTANT:
Wipe the ends of the hydraulic
quick couplers (both lead and loader) with a rag
to
remove
any
possible
contamination.
Contamination can cause hydraulic components
to fail and is not covered under warranty.
IMPORTANT:
Make sure the quick couplers are
fully engaged. If the quick couplers do not fully
engage, check to see that the couplers are the
same size and brand. Do not force the quick
couplers together.
NOTE:
See the loader’s operator’s manual for
auxiliary hydraulic specifications and connection
instructions.
NOTE:
Attachment is shipped with 8FJX (1/2”
Female JIC Swivel) fittings on the ends of the
lead hoses.
8. Make sure the hoses are properly routed to fit
your specific loader. If the hoses are not routed
correctly, hoses may get pinched or rub on tires.
Be sure to check the hose routing through the full
range of intended motion of the attachment
before operating it.
More than one routing may be acceptable
depending on the loader. Pick the routing that
best suits your loader.
IMPORTANT:
Proper hose routing is the
responsibility of the owner and/or operator.
Pinched or stretched hoses are not covered
under warranty.
Mounting is now complete and the attachment is
ready for operation. Use reverse order of above
instructions to dismount the attachment from the
loader.
Содержание V-Plow
Страница 13: ...13 PARTS INFORMATION ...
Страница 15: ...15 PARTS INFORMATION ...
Страница 17: ...17 BOLT TORQUE INFORMATION ...
Страница 20: ...20 P N 311377 Date Printed 11 13 2018 Erskine Attachments LLC Printed in U S A ...