7
USER’S MOUNTING INSTRUCTIONS
After the initial set-up assembly is completed, use the following procedure to mount the attachment to the loader.
Coupler wedges or pins must extend through holes in attachment. Levers must be fully
down and locked. Failure to secure wedges or pins can allow the attachment to come off and cause injury
or death.
1. Use the step, safety treads, and grab handles to
get on and off the loader and attachment.
2.
Sitting in the operator’s seat, lower seat bar (if so
equipped) and fasten the seat belt.
3. Drive the loader to the rear of the attachment. Put
the loader quick attach coupler into the attachment
mounting bracket.
4. Tilt the loader coupler backward a small amount
until it is fully engaged in the attachment mounting
bracket.
5. Stop the engine and engage the park brake.
6. Secure the coupler locking mechanism that
attaches the attachment to the loader.
Содержание V-Plow
Страница 13: ...13 PARTS INFORMATION ...
Страница 15: ...15 PARTS INFORMATION ...
Страница 17: ...17 BOLT TORQUE INFORMATION ...
Страница 20: ...20 P N 311377 Date Printed 11 13 2018 Erskine Attachments LLC Printed in U S A ...