Erskine Attachments 66 V4, Руководство оператора

Страница: 13 / 28

13
ROUTINE MAINTENANCE
B
A
Gearbox Fluid Check and Fill
1. Open the gearbox cover.
2. Remove the level check plug [B] to check the
fluid level in the gearbox. Fluid must be level
with the check plug hole.
3. To add EP80W-90 or EP85W-140 gear lube,
remove the fill plug [A] and add lube until it is
level with the check plug hole. Gearbox oil
capacity is approximately 32 ounces.
4. Reinstall the level check plug, the fill plug, and
the gearbox cover. Clean up any oil that may
have spilled.
IMPORTANT: Fluids such as engine oil, gear lube,
and hydraulic fluid must be disposed of in an
environmentally safe manner. Some regulations
require that certain spills and leaks be cleaned in a
specific manner. Check local, state, and federal
regulations for the correct disposal.
Inspecting the Motor Coupler
1. Remove the gearbox cover.
2. Check the condition and tightness of the nut,
bolt, and set screw. Replace as needed.
Moving parts may cause injury
or death. Always replace guard after servicing.
Do not operate without cover in place.