Declaration of Conformity
:
Hereby, CDVI Wireless Spa, declares that the radio equipment type
is in
compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: www.erone.com.
SEL2641R433-BD4
?
Safety measures
For a perfect functioning of the device, read carefully this manual and follow all the indications, since an
inadeguate use can make damages to the device.
2
Remarks
1 - INTRODUCTION
The 4 relay DIN guide receiver DIN SEL2641R433-BD4 is a superheterodyne receiver with 4 clean contacts outputs.
It can drive automation devices a nd alarm systems with max contact power of 3,5 KW.
The relay contacts are NO/NC. The operating mode of the relays can be pulse or step ( with dip switch selection )
The memorization of the remote controls can be carried on in self-learning.
The transmitter security codes are stored in a non-volatile memory ( EEPROM ).
Receiver type..........................................................................Superheterodyne
Carrier frequency ...................................................................433,92 MHz
Local oscillator frequency........................................................6,6128 MHz
Intermediate frequency ...........................................................10,7 MHz
Demodulation........................................................................AM/ASK
Channel width .......................................................................> 25 KHz
Input load..............................................................................50 Ohm
Local oscillator emissions ........................................................< -57 dBm
Sensitivity ( for good signal ) ....................................................- 115 dBm
Power supply .........................................................................12 Vac/dc
Current consumption ..............................................................250 mA @12 Vac
............................................................................................120 mA @12 Vdc
Output relay number ..............................................................4
Max power on relay contacts ...................................................3,5 KW / 230 Vac
Security coding ......................................................................Keeloq
®
Hopping code
Memory ................................................................................85 transmitter keys
Operating temperature ...........................................................-20°/+70°C
Enclosure IP grade .................................................................IP2X
Enclosure type........................................................................DIN 4 modules
Dimensions (mm ) ..................................................................70 x 90 x 60
Weight ..................................................................................420 gr
2 - TECHNICAL SPECIFICATIONS
T H E S M A R T L I V I N G
