5
6 - REMOTE CONTROLS MEMORIZATION
The memorization of the remote controls can be carried on in sequential way, by using only P1.
Each step is confirmed by the led R1, R2, R3, R4.
The procedure consists in a sequence of pressures of P1
The lighting of the leds R1, R2, R3, R4 is cyclic: at each pressure of P1 a led is turned on and the preceding led is turned
off. (fig. 2)
The led light is stable or blinking according to the setting of the corresponding dip-switch. ( see. cap. 8 )
Fig. 2
R1
R2
R3
R4
6.1
The relay configuration ( pulse or step ) is displayed by the led light
LED with stable light :
PULSE Relay
LED with blinking light :
BISTABLE or STEP Relay
Relay condition
6.2 4 keys remote memorization
The memorization consists in a sequence of pressures of P1
Example 2
: 4 keys remote memorization with the following links:
Key A --> Relay 1, Key B --> Relay 2, Key C --> Relay 3, Key D --> Relay 4.
T H E S M A R T L I V I N G
Keep P1 pushed for 2
sec. until LD1
switches on
R1 lits
Release
P1
Push key A of the
transmitter to
memorize
Press P1
Push key B of the
transmitter to
memorize
Release
P1
R2 lits
R1 switches off
and on again
R3 lits
Release
P1
Push key C of the
transmitter to
memorize
Push P1
Push key D of the
transmitter to
memorize
Release
P1
R4 lits
R4 switches off and on
and after 2 sec.
switches off
Press
P1
Fig. 3
R2
and on again
switches off
R3
and on again
switches off
