Pag. 8
USER transmitters memorization
The procedure begins at point (1) of the main menu.
S T O R E
U S E R
M E N U
U S E R
S N
0 0 0 0 1
The cursor blinks under the first left digit of the Serial
Number to set.
For this operation there you can use 3 different methods:
1) With the TX MASTER
Scroll up the digit with the LEFT key ( cliclically ) and shift
right to confirm with the RIGHT key.
Push LEFT+RIGHT keys simultaneously to cancel and to go
back to the upper menu;
2) With the KEYPAD
Use the keys of the keypad to set the right number and shift
right to confirm with the key (#);
3) With the TX USER
Push the key B of the USER transmitter which has to be
memorized: its Serial Number will replace the default
number of the message. Then push the RIGHT key of the
MASTER transmitter.
Once set ( for instance) the S/N : 20160, as explained
above, the program will ask for the relay [ 1, 2 or ½ ] and
the keys configuration [ A,B,C,D].
U S E R
S N
2 0 6 1 0
R E L A Y : ½
K E Y : A
Modify the parameters RELAY and KEY according to your
needs by using the MASTER transmitter.
The next step allows to choose a “single” or a “block”
memorization.
U S E R
S N 2 0 6 1 0
S T O R E S I N G L E ?
With an answer “YES” to the above question this phase
ends and the message “EXECUTED OK” appears on the
display.
With an answer “NO” begins the procedure for the block
memorization: the display will show the S/N of the first
transmitter of the block.
Entry the number of TX with the TX MASTER
S T O R E
0 0 0 0
T X
A R E
Y O U
S U R E ?
Give the confirmation with the RIGHT Key of the MASTER
transmitter.
NOTE :
If the memory contains already any transmitter with S/N
included in the range of the block, the entire operation is
cancelled and on the display appears the following
message:
S N X X X X X R L X K Y X
S E R I A L E X I S T !
Where XXXXX is the Serial Number of the transmitter
already present in the memory, RL X is the relay activated
and KY X is the transmitter key associated.
U S E R
S N
2 0 6 1 0
H O W M A N Y
T X
0 0 0 0
The next question proposed is the number of transmtters of
the block.
