Pag. 17
Number of the stored USER transmitters
At the point N° 6 of the main menu, the program shows
the number of the USER transmitters present in the
memory.
This number refers only to the USER transmitters and not
to the MASTER transmitters, which can be up to 7.
This number is updated after any variation
( new memorization / cancellation, memory
initialization).
The Erone 433/800 receiver contains an auto-test system which makes it possible to identify incorrect usages or
readings.
Example of the message on the display:
CODE DESCRIPTION
ACTION
Receiver auto-test system
SYSTEM
ERROR
Memory empty. Return the receiver to the factory
Copy the contents of the receiver to the backup and
memory and return the receiver to the factory.
Repeat the programming of the transmitter.
If the message is persistent, check the memory position
on the receiver, memorize again, and then start transfer
again.
Memory full
Last memory position: use a previous position or replace
a position already used.
Check the charge on the batteries of the transmitter or
bring the transmitter near the receiver
Transmit a second time
If the message persists, eliminate the memory position of
the transmitter and then memorize again.
If, after the transfer of a transmitter, the number of
impulses allowed (16) has been exceeded, the counter
will no longer be synchronized and the transmitter cannot
be memorized in the receiver.
1
Impossible to write on the memory
2
Reading or writing error on the display
4
Faulty transfer of the data to a transmitter
via connecting cable
8
Used for checking during production
16
Used for checking during production
32
Writing on the last memory position
Es. 800 or 812.
64
Radio signal received too weak
128
Transmitter counter not synchronized
