Verarbeitungsspezifikation MaxiBridge CSI
/
Processing Specification MaxiBridge CSI
erstellt: Darius Clement
geprüft: Bernd Schmitt
freigegeben: Achim Schoch
am: 01.12.2017
Version 6
IMS Verarbeitungsspezifikationen
Seite 24 von 26
Assembly - dual row version
The dual row MaxiBridge connector consists of housing with contact chambers and two locking components
(secondary locking left and right).
When handling, please take note that housing and locking are not unintentionally locked before all the contacts
have been assembled.
Contact chamber assignment is taking place in accordance with the work documents.
The contact must be inserted in correct position into the chamber until the primary locking is audibly engaged.
Correct engagement of the primary locking can be checked by pulling backwards the cable (max. 10N).
After contact assembly, the housing and secondary lockings must be gently pressed together.
The secondary lockings must be fully engaged and closed.
Only fully engaged lockings ensure proper secondary locking function.
Secondary locking
Locking tab
Locking tab
Primary locking
Secondary locking
Contact chamber
marking b1
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
