Verarbeitungsspezifikation MaxiBridge CSI
/
Processing Specification MaxiBridge CSI
erstellt: Darius Clement
geprüft: Bernd Schmitt
freigegeben: Achim Schoch
am: 01.12.2017
Version 6
IMS Verarbeitungsspezifikationen
Seite 23 von 26
Assembly - single row version
The single row MaxiBridge connector consists of housing with contact chambers and locking component
(secondary locking).
When handling, please take note that housing and locking are not unintentionally locked before all the contacts
have been assembled.
Contact chamber assignment is taking place in accordance with the work documents.
The contact must be inserted in correct position into the chamber until the primary locking is audibly engaged.
Correct engagement of the primary locking can be checked by pulling backwards the cable (max. 10N).
After contact assembly, the housing and secondary locking must be gently pressed together.
The secondary locking must be fully engaged and closed.
Only fully engaged locking ensures proper secondary locking function.
Primary locking
Secondary locking
Locking tab
ERNI Logo
Contact chamber
marking
Secondary locking
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
