Verarbeitungsspezifikation MaxiBridge CSI
/
Processing Specification MaxiBridge CSI
erstellt: Darius Clement
geprüft: Bernd Schmitt
freigegeben: Achim Schoch
am: 01.12.2017
Version 6
IMS Verarbeitungsspezifikationen
Seite 21 von 26
Pull-out forces according to IEC 60352-2 respectively LV214 PG 10
Minimum pull-out forces are listed in table 2.
Tear-off characteristics
The tear-off characteristics has to be assessed positively, if the single strands tear-off irregularly behind the
bellmouth once the pull-out force (see table 2 ) has been achieved.
Figure 8
The single strands tear-off directly behind the bellmouth: overpressed.
The single strands do not tear-off and are pulled out of the crimp: underpressed.
Illustration of an optimal tear-off behavior
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
