Handling of form pot, model disc and the placement of the models:
5
Form pot with carrying
cross for model discs
Use model disc only
with carrying cross!!
Bottom side of the form
pot with transverse
groove
Foil-reception (1) and
foil securing ring (2)
2 Model discs
*
Note
page 11!
Model disc with screws
for positioning models
Counterpart to the
groove on the form
pot table
Form pot with model
disc
7 models,
6 are placed on screws
as shown and 1 in the
middle.
To place up to 9 small
models, insert the
model disc with the
screws facing down.
Make sure that the
distance between the
models is at least 1 cm
and do not exceed the
ring.
The models must not
extend beyond the
marked ring
The form pot must be placed on the forming
pot table with the transverse groove in the
counterpart
1
2
Erkopress 240
Unit components:
