to 4. Only after
confirmation of 3.
the selected foil is
heated.
The further thermo-
forming process and
the movement of the
form pot are
automated.
to 3. Now place the
form pot with model
disc and the models
arranged on it on the
form pot table and
confirm (yes).
to 3. Air blowing noises
during the cooling time
serve for cooling.
to 7. ... and confirm.
*
Note
on page 11!
to 2. Place foil recep-
tion with foil onto the
insertion ramp and
push it thus far under
the heater that it clicks
into place.
to 5. Warning appears
shortly before and dur-
ing cylinder release.
to 1. Correct foil?,
if yes, confirm.
In the display further
working steps are indi-
cated. The visualisation
disappears with the next
step.
Put the selected foil
in the foil reception
and clamp with the foil
securing ring.
1. Selected foil
2. Insert foil reception
5. Risk of crushing
3. Form pot in place?
6. Cooling time
7. Remove models
4. Foil is heated
Await further device
function step.
Thermoforming:
9
Hint:
The function icon „X“ stops the respective
process. Each abort must be confirmed.
to 2.
