Ericsson S-825 Series, Руководство по установке, Страница: 17 / 36

20
c. Before replacing the fairing, the vehicle system cable and any option
cables may be run under the fairing also. Then replace the fairing by
removing the gas cap, repositioning the fairing, then replacing the
gas cap and the three screws that secure the fairing.
For motorcycle models not equipped with a gas tank fairing:
After making power connections, run the power/control and vehicle system
cables (as well as any option cables) up the left side of the motorcycle to
the control unit and secure the cables with the cable ties. Note that all
cables connect to the back of the control unit.
MICROPHONE BRACKET
After mounting the control unit and connecting the microphone, mount the
microphone hang-up bracket in a location that is convenient to the
operator, and where it will not interfere with the safe operation of the
motorcycle. For ease of installation, Figure 2 shows the microphone
hang-up bracket mounted on a customer-provided mounting plate.
Figure 12. Cable Routing to the Control Unit
17
11. Install a new ring terminal on the black cable and connect it to battery
minus (-).
Any extra length of the power/control cable can be coiled
under the motorcycle seat and secured to prevent
interference with the operation of the motorcycle. See
Figure 10.
NOTE
Figure 9. Power/Control Cable Installation
Figure 10. Under Seat Cable Installation