The Power Supply is supplied with the following accessory items:
1.
Interconnecting cable with positive and negative conductors installed
2.
Two 3-15/16 inch (10cm) wires with connector pins installed for perma-
nent installations.
3.
One 3-15/16 inch (10cm) coaxial audio cable with connector pins and 3.5
mm audio plug installed.
4.
Four rubber anti-abrasion pads for protection of the power supply and
radio paint surfaces.
5.
Two mounting brackets for securing the radio to the power supply.
6.
One spare 3 amp 125 volt 3AG fuse. (NOTE: Replace fuse only with the
same type and style specified.)
Figure 7 - Grounding Methods
13
