Ericsson GE EDACS Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 66

background image

LBI-39077

GETTING STARTED

14

Get/Verify

Use the get/verify operation to get the current GTI database from the GTI units in the selected system, and verify it against the
current GTI database for that system in the GTI Configurator. Figure 6 shows a sample Get/Verify menu screen with the
Entire category selected. When this category is first selected, the Database Verify operation is automatically selected.
Selecting another operation will change the information in the HELP window.

EDACS GTI Configurator/Database Manager V1.3 (SUPERVISOR mode)

GET/VERIFY MENU: ì Entire Verify ì

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿

³ Database Verify ³

³ Database Retrieve ³

ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

ÉÍHELPÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÉÍSTATUSÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»

ºSelect item with arrow keys and ººRequesting unit type.... º

ºENTER or capital letter. ESC to quit ººConnected to GTI system! º

º ººReady to process commands º

ºAll records in PC database for a ºº º

ºselected system are verified against ºº º

ºthe database in the unit. ºº º

ºA count of differences is noted. ºº º

ºData in not stored. ºº º

ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼

Still connected to System

Figure 6 - Sample Get/Verify Menu Screen with the Entire Category Selected

The Entire category of operations continues to require communication with a GTI unit in the system via a local or remote
data link, to send and/or receive information about the system’s configuration or performance. This category includes the
following specific operations:

•

The Database Verify operation is used to check the GTI Configurator database files against the RAM contents of
the GTI units in the selected system. If one or more discrepancies are found, the GTI Configurator will notify you on
the computer screen. No new database is created.

•

The Database Retrieve operation is used to retrieve the RAM contents of the GTI units in the selected system, and
store it as a new system named VERIFIED in the GTI Configurator database files.

NOTE

Selecting the Database Retrieve operation from the Entire category retrieves data from all connected GTI units, even if they
have not yet been configured by the GTI Configurator. The unconfigured GTI units will report their unconfigured telco and
system databases, derived from their powerup hardware configuration.

«
...
12
13
14
15
16
...
»

Содержание EDACS



































































Отзывы:

Нет отзывов

Похожие инструкции для EDACS

Avccam AG-AF100A Series

Бренд: Panasonic Страницы: 19

ANTI-VIRUS 5.0 - FOR SAMBA SERVERS

Бренд: KAPERSKY Страницы: 84

ADMINISTRATION KIT 6.0

Бренд: KAPERSKY Страницы: 37

ADMINISTRATION KIT 6.0

Бренд: KAPERSKY Страницы: 109

Phaser 340 Installer

Бренд: Xerox Страницы: 2

Active Protection System

Бренд: Lenovo Страницы: 10

Бренд: Lenovo Страницы: 464

Бренд: Lenovo Страницы: 3

Бренд: Extron electronics Страницы: 124

APPLICATION STACK 2.2 RELEASE

Бренд: Red Hat Страницы: 22

RESCUE CD - FOR WINDOWS V 85.2

Бренд: AVG Страницы: 83

ANTI-VIRUS BUSINESS EDITION 2011 - REV 2011.01

Бренд: AVG Страницы: 128

VSHIELD APP 1.0.0 UPDATE 1 - API

Бренд: VMware Страницы: 144

K2-AVID TRANSFER MANAGER

Бренд: GRASS VALLEY Страницы: 2

pcXset - NBX - PC

Бренд: 3Com Страницы: 26

Crown Document Option Commands

Бренд: MINOLTA-QMS Страницы: 134

Бренд: AAS Страницы: 177

Бренд: Daikin Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды