background image

Please follow the instructions for the use of the Erica Synths 
SYNTRX II below,  because only this will guarantee the 
proper operation of the module and ensure the warranty 
from Erica Synths. 

Use the SYNTRX II exclusively with the power supply unit 
(PSU) supplied with the system. Powering it with other PSU 
units may cause permanent damage to the device.

Water is lethal for most electric devices unless they have 
been rendered waterproof. The SYNTRX II is NOT intended 
for use in a humid or wet environment. No liquids or other 
conducting substances should be allowed into the module. 
Should this happen, the module should be disconnected 
from mains power immediately, dried, examined and 
cleaned by a qualified technician. 

Do not expose the instrument to temperatures above +50° 
C or below -20° C. If you have transported the instrument in 
extremely low temperatures, leave it at room temperature 
for an hour before plugging it in.

Transport the instrument carefully. Never let it drop or fall 
over.  The Warranty does not apply to instruments with 
visual damage.

SYNTRX II must be shipped in the original packaging only. 
Any instrument shipped to us for return, exchange and/or 
warranty repair must be in its original packaging. All other 
deliveries will be rejected and returned to you. Ensure that  
you keep the original packaging and technical 
documentation. 

DISPOSAL

This device complies with EU guidelines and is 
manufactured and confront RoHS without the use of lead, 
mercury, cadmium or chrome. Nevertheless, this device is 
special waste and disposal in household waste is not 
recommended.

User manual by Girts Ozolins@Erica Synths.
Design by Ineta Briede@Black8 & Maija Vitola@Black8. 

Copying, distribution or any commercial use in any way is 
prohibited and needs the written permission of Erica Synths.

The specifications are subject to change without notice.

If you have any questions, feel free to contact us 
on SUPPORT section on www.ericasynths.lv

WARRANTY

You will find the Erica Synths terms
of warranty at www.ericasynths.lv

Items for return, exchange and/or warranty repair 
should be sent us according to the guidelines on 
SUPPORT section on www.ericasynths.lv

SAFETY INSTRUCTIONS 

3

44

Содержание SYNTRX II




























Отзывы: