CONFIGURATION SETTINGS
25
There are two kinds of configuration settings – per-patch and global ones.
Per-patch settings are saved with the individual patches, while global settings are
applied to all patches.
Use the left (Y) encoder to navigate through the configuration setting menu pages
and the right encoder (X) to alter the settings. A LED dot in the far-right column
indicates the page you are in. Every setting starts with an info screen that turns into
a running line with the name of the setting, on the bottom part of the screen you
can see the configuration options.
The patch-relevant settings (per-patch settings) come first, and they are:
FX MODE. The delay and reverb effects can be set to TAPE or BBD mode. The
screen (see the example to the right) shows FX BD (running line - FX BBD) and
the options are OFF and ON. If you select ON, the BBD mode is activated.
FEEDBACK ON THE REVERB. Instead of the default tone adjustment on the
reverberation effect, you can have a feedback adjustment. At the maximum
clockwise setting of the FEEDBACK knob, the reverb will work as a sampler that
samples a certain amount of audio depending on the TIME setting and will loop
it. The screen shows REV F (running line - REVERB FEEDBACK) and the options
are OFF and ON. If you select ON, the feedback mode on the reverb is activated.
All configuration settings on the SYNTRX II are done via the patch matrix. In order to access the configuration settings, push and hold the
SHIFT
button and push the
< PATCH button. The configuration setting screen will appear.
SIGNAL INPUTS
CONTROL INPUTS
Ch1 Output
Scope
Ch2 Output
Envelope Signal
Filter
Deca
y
Oscilla
tor Shape
S&H Input
Filter Frequency
Output
ch. level
Ringmod A
Ef
fects
1
2
Oscilla
tor
frequency
1
2
3
SOURCES
TREA
TMENTS
Oscillator 3
+S&H
Noise
Input 1
Env. Follower
Input 2
Env. signal
Filter
Trapezoid
Ring mod
Effects
Joystick
Oscillator 2
Oscillator 1
Содержание SYNTRX II
Страница 1: ...USER MANUAL...