background image

The SYNTRX II has a distinct looping envelope generator called TRAPEZOID. It is 
functionally similar to the one found on the EMS Synthi, because the envelope 
shape is reminiscent of a trapeze. The Trapezoid generates control voltages to 
control events on the SYNTRX – signal amplitude, pitch of the oscillators, cutoff 
frequency of the filter, etc. By default, it is a looping envelope generator with 4 
stages – ATTACK, ON, release (DECAY), and OFF. 

All stages are manually adjustable and the decay stage is also voltage controlled, 
so the decay time of the envelope can be varied automatically if a control voltage 
is applied to the Decay input on the matrix mixer. If the OFF control is set to more 
than 9, the looping is terminated and a new envelope cycle can be initiated by 
pressing the GATE button next to the joystick controller. If the SYNTRX II is used 
with external CV/Gate signals (connected to CV and Gate inputs correspondingly) 
or a MIDI keyboard or sequencer, in most cases, the looping must be off (OFF 
control all way clockwise), otherwise, when the gate will be off, the envelope will 
start looping. Also with the external gate signal applied, the ON knob will have no 
effect – the ON time is defined by the gate length. 
The output level of the envelope generator is adjusted by the TRAPEZOID knob, in 
other words, it sets the modulation depth for other “modules” on the SYNTRX II.
Besides the envelope generator, the trapezoid unit has a built-in voltage-controlled 
amplifier (VCA); its control voltage input is linked to the output of the envelope 
generator. The audio signal input of the VCA is the Envelope Signal input on the 
patch matrix and the SIGNAL control in the trapezoid unit sets the audio signal 
level after the VCA output.
The LED gives visual feedback on the envelope generator status

ATTACK time of the envelope generator is 6ms – 850ms
ON time of the envelope generator is 0-1,5s
DECAY time of the envelope generator is 16ms – 2s
OFF time of the envelope generator is 14ms – 1,3s

TRAPEZOID - ENVELOPE GENERATOR AND
VOLTAGE CONTROLED AMPLIFIER

OUTPUT LEVEL

LAMP ON

LAMP ON

ATTACK

TIME

ATTACK

TIME

ON

TIME

ON

TIME

DECAY

TIME

OFF

TIME

LAMP DIM OR OFF

ATTACK BUTTON 

IN MANUAL MODE

TIME

TRAPEZOID

SIGNAL

DECAY

TRAPEZOID

ON

ATTACK

OFF

MANUAL

10

Содержание SYNTRX II




























Отзывы: