Erica Synths Drum Sequencer, Руководство пользователя

Страница: 5 / 18

TUNE SUBOSC LVL BEEF
CUTOFF RESONANCE FM LEVEL
CUTOFF CV VCF ENV VCA ENV
VCF WAVE C OFF CV 1V/OCT FM IN
MAIN OUT SQR OUT GATE ACCENT TRI OUT
BP
LP
SQR
SAW
TRI
Set the initial tune of the VCO
Add some power to the sound! Turning the
suboscillator level knob CW simultaneously adds
one octave down transistor-based suboscillaotr and
opens dedicated LP filter, so the suboscillator fades in
gently and reveals its real character at full CW setting
Detune function emulates sound of the synh with
several detuned VCOs. Two BBD lines act as a frequency
shifter and a resulting signal is mixed with the original
one. Turning the Detune knob CW also increases
frequency of the LFO that controls BBD lines, so at full
CW setting you get quite an FM madness
Control the VCF cutoff manually. With cutoff CV applied
(from VCF envelope and/or external), you’ll need to
adjust initial cutoff for acid bassline sweetspots
Adjust the VCF resonance! The filter used in the
module is the same as on AcidboxIII, and it’s capable of
extreme resonance sweeps. Mind your speakers!
This is external FM level attenuator. You can also do
some self-modulation by patching TRI OUT in to FM IN
and increasing FM level. Enjoy!
Adjust VCF cutoff CV level! If nothing is patched in C OFF CV
input, it adjusts VCF envelope impact on the cutoff
TUNE
SUBOSC LVL
DETUNE
CUTOFF
RESONANCE
FM LEVEL
CUTOFF CV
VCF ENV
C OFF CV
1V/OCT
FM IN
GATE
ACCENT
MAIN OUT
TRI OUT
VCF
WAVE
VCA ENV
Adjust the VCF cutoff envelope decay time
Adjust the VCA envelope decay time. Full CW setting
will open the VCA even the gate is not present
Select the VCF mode
Select the VCO waveform that is sent to the master
output
This is an external CV input to control the VCF cutoff
This is the VCO 1V/oct input. It tracks well over
9 octaves
This is the VCO FM input
This is the Gate input. It accepts gate from any
sequencer and sends it to the VCF and VCA
envelopes simultaneously
This is the Accent input. +10V CV will increase the
volume and open the VCF slightly to an expression
to the bassline
This is the main output of the module
These are additional VCO outputs, and they are not
affected by VCF and VCA. You can use them as
additional sound sources that are in tune with your
bassline