Erica Synths BASSLINE DB-01, Руководство пользователя

Страница: 9 / 20

PROGRAMMING THE SLIDE TRACK PROGRAMMING THE MODULATION TRACK
Push and hold the SHIFT button and push the SLIDE button! The sequencer will advance
to the slide entry mode. You will see 70% dimmed step buttons showing which steps are
active in the sequence. Push the step buttons for steps that you wish to slide, and step
button LEDs will go on full brightness. With the slide activated the pitch of the activated,
step will slide to the one for the next active step. To return to the step enter menu, push
the BACK/NOTE encoder.
Push and hold the SHIFT button and push the MOD (modulation track) button! The sequencer
will advance to the modulation track mode. The modulation track basically adds a certain
amount of CV to the the VCF cutoff knob setting, so you can add more dynamics to your
sequence. There are two ways to program the modulation track – per step and live record.
To program the modulations per step, push and hold the relevant step button and rotate the
VCF cutoff knob. The indicator will show the relative voltage that will be added (if you rotate
the cutoff knob clockwise) or subtracted (if you rotate the cutoff knob counter clockwise)
from the initial cutoff knob setting. Once you are happy with the setting, push and hold
another step button and adjust the cutoff knob, etc. To live record the modulation track,
push and hold the RECORD button and with the sequencer running, turn the VCF cutoff knob.
The cutoff knob movement will be recorded in relation to the BPM. To clear the modulation,
press SHIFT + CLEAR and mark which steps you want to clear with the step buttons. To
return to the step enter menu, push the BACK/NOTE encoder.