Erica Synths BASSLINE DB-01, Руководство пользователя

Страница: 18 / 20

CONFIGURATION SETTINGS
In the configuration menu, you can configure different parameters for the Bassline DB-01. To
access all the configuration functions below, push and hold the SHIFT button and push the
CONFIG (+1 OCT) button!
CLOCK settings.
Rotate the SELECT/GATE encoder until CLK appears in the indicator (it’s the first setting, so
normally you do not need to rotate the encoder). Push and hold the SELECT/GATE encoder
and rotate the BACK/NOTE encoder to select the clock source. The available options are:
internal clock (INT), external clock (EXT) – analogue 4 ppq clock signal connected to CLK IN
jack used for synchronizing the DB-01 with other devices, or MIDI clock (MID).
MIDI IN settings.
Rotate the SELECT/GATE encoder until MIN appears in the indicator. Push and hold the
SELECT/GATE encoder and rotate the BACK/NOTE encoder to select the MIDI channel on
which the DB-01 receives MIDI note messages. Rotating the encoder counterclockwise turns
the MIDI input off, rotating it clockwise allows you to select a MIDI channel.
MIDI OUT CHANNEL settings.
Rotate the SELECT/GATE encoder until MOT appears in the indicator. Push and hold the
SELECT/GATE encoder and rotate the BACK/NOTE encoder to select the MIDI channel on which the
DB-01 sends MIDI note messages. Rotating the encoder counterclockwise selects between MIDI
OUT or MIDI THRU, while rotating it clockwise allows you to select a MIDI channel.
MIDI clock out settings.
Rotate the SELECT/GATE encoder until MCK appears in the indicator and rotate the BACK/NOTE
encoder to engage (ON) or disengage (OFF) the MIDI clock message on MIDI OUT.
BAR FOLLOW settings.
When programming and/or performing longer than 16 step sequences with the DB-01, normally you
need to navigate through the bars manually by pressing <BAR> buttons. With BAR FOLLOW ON the
sequencer will automatically advance to the steps for the next bar in the sequence. Push and hold
the SELECT/GATE encoder and rotate the BACK/NOTE encoder to engage (ON) or disengage (OFF)
the bar follow function.
Volume adjustment.
VOL parameter lets you adjust the main out volume, this is especially useful when using the unit
together with guitar pedals as they usually work better with lower signal levels.
Fine-tune.
The master tune of the Bassline is set to 440Hz, but you can fine-tune it. To do so, navigate to the
TUN setting, push and hold the SELECT/GATE encoder and rotate the BACK/NOTE encoder to adjust
the master tune of the Bassline from 430Hz to 450Hz.
MEMORY BACKUP.
For your peace of mind, you can backup all your DB-01 patterns to your computer/recorder as an
audio file. In order to BACKUP the memory, rotate the SELECT/GATE encoder until BKP appears in
the indicator. Push the SELECT/GATE encoder and TX (transmit) will appear on the indicator.