Erica Synths BASSLINE DB-01, Руководство пользователя

Страница: 16 / 20

STEP/PATTERN PASTE SELECTING A BANK FOR PATTERN SAVE/LOAD
Once a part of the sequence is copied, you can paste it to another destination. The paste function
is more advanced than copy – you can paste ALL information for steps that you copied, but you
can also paste specific parameters (e.g. accent, slide, modulation settings) only. In order to paste
all information in the steps, push and hold the SHIFT button, and push the PASTE button. Now,
simply push the first step of the sequence you are about to paste and all steps copied will be
pasted. Please note that if you are pasting the steps in the sequence with some already active
steps, these will be overwritten. In order to paste SPECIFIC information (e.g. modulation track only)
for the steps copied before, initiate the relevant mode (SHIFT+MOD for a modulation track, for
example), and then push and hold the SHIFT button and push the PASTE button. Now, simply push
the first step of the sequence you are about to paste and the modulation settings of the steps,
copied before will be pasted. To return to the step enter menu, push the BACK/NOTE encoder.
If you used a copy shortcut for the single step, and wish to paste exactly the same settings to
more steps, push and hold the step button to which you want to paste the information and push
the BAR> button (just above the PASTE button). All information is pasted to the relevant step.
The Bassline DB-01 has a memory of 8 banks of 16 patterns. Before you start
designing a pattern, you must select the bank that you need for pattern
saving/loading. To do so, push and hold the SHIFT button and push the BANK
button. The first ten step buttons will appear 70% dimmed, representing the
available banks, and the banks with some patterns saved already will appear fully
lit. Just push one of the bank buttons to select a bank. To return to the step enter
menu, push the BACK/NOTE encoder.