PATTERN RANDOMIZATION
In order to have nice unpredictability when working with DB-01, the pattern
randomization is implemented. You can randomize all pattern settings or
specific parts (notes, gates, accent, slide, modulation track, etc.) of it. To
start pattern randomization, push and hold the SHIFT button and push RND
PATT button! The sequencer now is in randomization mode, and parameters
available for randomization are lit on the step buttons.
For Accent randomization, hit the ACC button, for Slide randomization -
SLIDE button, for Modulation track randomization - MOD button, for Pitch
Envelope randomization - PITCH ENV. The LAST STEP button randomizes
Step On probability, the PLAY MODE button - step play probability (fractions
or percent), the TRANSP button - Gate length and the SCALE button -
Notes (sorry, this is not straight-forward, but the NOTE encoder has the
BACK function, so it can't be used for note randomization). The PATTERN
button randomizes entire pattern – all parameters simultaneously.
For some parameters you may want to have a
specific range, in which
randomization takes place. For example, you may want note randomization
limited to certain amount of octaves. To set randomization range for each
parameter, make sure, you are in the RND mode, and all randomizable
parameters appear lit. Now push and hold the step button corresponding to
the parameter, you want to alter, and use both SELECT/GATE and
BACK/NOTE encoders to adjust randomization range. There are on/off
parameters, like Accent, Slide, Step On and Step Play probability, where you
set percentage of randomization on steps (at what percent of the steps the
given parameter will be randomized in the sequence), but for Modulation,
Pitch Envelope, Gates and Notes, you can set the lowest and highest limits
of randomization via SELECT/GATE and BACK/NOTE encoders correspond-
ingly. For example, if you want to set Modulation randomization in scope
form -10 to +20, push and hold the MOD button, and rotate the SELECT/GATE
encoder to set -10 and the BACK/NOTE encoder to set +20. Same goes with
the pitch envelope, notes and gate length. To save the randomization
parameters push the REC button. Settings are saved in the selected bank,
and next time, you open RND PATT page, they will be the same.
To return to the step enter menu, push the BACK/NOTE encoder.
Содержание BASSLINE DB-01
Страница 1: ...U S E R M A N U A L...