Ergosana Sana comfort 150 REHA, Руководство пользователя

Страница: 18 / 25

Sana comfort 150 and 250 REHA
Article no.: 2.520064 rev.: b Page 18 of 24
7.4 Training program (option)
The use of the training program requires a pulse signal receiver (Polar system), which is integrated in the
control panel. The receiver can be ordered together with the device or added later on.
The patient wears a transmitter belt, which is positioned on the skin below the chest. The effective radius
of the signals transmitted by the belt and received in the control panel is approx. 70 cm. Please note that
if the skin is dry, contact problems may occur between the belt and the skin at the beginning of the train-
ing. Therefore, if the pulse transmission is unsteady or disturbed, moisten the contact surfaces of the
transmitter belt with contact spray or water.
7.4.1
Training with constant heart rate (Pulse-Steady-State)
A bicycle ergometer training with constant heart rate (pulse-steady-state method) in the individual train-
ing range is a highly efficient and risk-free training method for the cardiopulmonary system. Ask your
physician which is the suitable training heart rate for you. He or she will determine it for you using an
exercise test.
7.4.2
Configuring a training program on the ergometer
To define a training program, select the menu option Define program. Then select the menu option Train-
ing using the arrow keys.
The below settings panel is displayed.
To set or change the parameters in order, press modify.
The first setting defines the Initial load, e.g.
50 watts.
The setting Duration A1 controls the du-
ration of warming-up phase 1, e.g. 1min.
The setting Increase in load controls by
how many watts per minute the load is
increased.
This is the warming-up phase 2.
In special cases, this phase can be lim- ited
in time using the next setting Duration A2.
By default, the warming-up phase 2 is
finished when the target HR is reached.
When the target HR is reached, the load
applied is automatically reduced by 10%.
This measure is to prevent a too great
heart rate increase during the training
phase (TP), which now begins.
The Target HR is set by the next parameter. The setting Duration of training controls the duration of
the training phase (TP). The setting Cool down controls the period of time in which the load is re-
duced to 0 watts after termination of the training phase. The following settings Ask for Po – no/yes,
Ask for HR – no/yes and Ask for weight – no/yes can be viewed when a new training is started and
edited. Editing these parameters can be required when different persons want to use the training pro-
gram.