5.
Installation
5.1 Lifting and unloading of the machine
Lift the system from the truck or pallet by the lifting device using a crane or
forklift as shown.
Place the system on a flat and preferably even ground and remove the lifting
device by taking out the lower locking pin.
Make sure the brakes of both guide rollers are blocked (pedals are in upright
position):
Fig. 11a
Fig. 11b
Fig. 12a
Fig. 12b
Fig. 13a
Fig. 13b
lock guide rollers
lock guide rollers
-22-
Warning!
Only the lifting device delivered with the system may be used for lifting the
system. Any other lifting method means danger for man and system. For
using the lifting device, the pre-set strapping height must not exceed 10 cm
(see 6.10). The lifting device has to be removed prior to any operation of the
system.