Ergonomic products D1 Workstation, Руководство по сборке и установке

Страница: 9 / 15

8
Section 4 - USB Keyboard connection
Your Ergonomic Products Workstation supports USB (Universal Serial Bus) for connections to a Mac or PC computer
keyboard (not supplied). The following section describes the connection process.
1. Remove both Keyboard Slide Bracket Screws with a
1/8” Allen wrench (supplied). Locate both
Top Tier Set Screws and loosen with the suppli
ed 5/32” Allen wrench (supplied) until Top Tier can
be lifted away from posts. (Fig. 10)
Top tier set screw (detail)
Keyboard
slide bracket
screws
(2)
Top tier set screws (2)
Fig. 10
2. Lifting the Top Tier Worksurface away, run USB cable from a USB Keyboard (not supplied)
down the length of the slotted support shaft and replace the Top Tier Worksurface. Re-tighten
the Top Tier Set Screws and replace the Keyboard Slide Bracket Screws. (Fig. 11)
Top tier work surface
USB cable (from USB keyboard)
Top tier support shaft
w/slot
Fig. 11