Ergonomic products D1 Workstation, Руководство по сборке и установке

Страница: 7 / 15

6
Section 3 - installation
Umbilical Installation
All of the utilities required by your Workstation are supplied via the Umbilical Tube. Installation simply involves
plugging in tubing and electrical connectors. After connections are made, install hose clamp and umbilical
cover.
1. Plug in 9 pin power connector and tubing connector. (See fig. 7)
Be Careful not to cut or damage any of the tubes and wires inside the umbilical tube.
9 Pin Power connector
Black, yellow, red wires on top
Tubing Connector:
Move lever clockwise to install or
remove; Move counter
clockwise to lock
Fig 7
2. Plug suction hose onto copper tube. Run USB cord through hole and make appropriate
connections. (See fig. 8)
USB Port
120 V Outlet
Fig. 8