16
Headboard
a
nd Shroud Installation Guide
11. Plug in the power plug again, and then
turn on the power. Press the head up key
and the foot up key on the remote control,
to raise the head and footto the highest
position,and take connecting piece,screws
and nuts from electrics-box, then lock both
ends of connecting piece on iron frame of
beds with screws, finally confirm that there
is no interference between the bed core
and the surround.
STEP 11
10.Lock the rubber gasket on square tube
of metal frame of shroud, then make base
frame flat on the rubber gasket.
STEP 10
9.Fasten the two ends of the foot plate to
the two side plates.
STEP 9
