15
Headboard
a
nd Shroud Installation Guide
5.Attach the bottom plate of the back to
the side plate with countersunk cross
M8x40 screws (D) and long surrounds (A).
7.Secure the backrest with the Phillips
head screw (C) (M8X40) and the three-way
connector (B) (left and right).
8.From behind, secure the backrest and
base plate with the countersunk hexagon
(M8x50) screws (E) and the back tab (G).
STEP 5
STEP 7
STEP 8
6.Raise the backrest and insert the male
snaps on both sides of the backrest into
the female buckles (make sure the male
snaps are inserted into the female snaps
to prevent scratches on the skin).
STEP 6
4.Secure the side plates to the sides of the
frame with countersunk cross M8x40
screws (D)
STEP 4
3.The four iron frames are buckled to form
a single unit, and four corners are locked
with screws (M8X70) (F).
STEP 3
