11
Pairing Remote Control
Remote Pairing
*ALTERNATE REMOTE PAIRING PROCESS!
Locate the Control Box (see base overview and quick
reference guide for corresponding base) and press the Reset/
Pairing button twice. A pairing LED light will illuminate green
on the Control Box. On the back of the remote, press and
hold the PAIR button. The PAIR button will illuminate blue and
start ashing. When the PAIR button stops ashing, the green
LED light on the Control Box will go out. Release the PAIR
button. The remote is now paired to the adjustable base.
Pairing
LED Light
Reset/Pairing
Button
POWER DOWN
Button
Test all remote functions. If the remote buttons do not impact
the adjustable base movements, please repeat the process
again or call Ergomotion customer service: U.S. 1-888-550-3746
STEP 1
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event that the
remote is not paired with the base, follow the steps below.*
Locate the Power Down Box and
press the button TWICE. A light
on the Battery Back Up Box will
illuminate.
STEP 3
PAIR
Button
STEP 2
Remove the back cover of the
remote, press and hold down
the PAIR button. The PAIR
button will illuminate blue
and start flashing. When the
PAIR button stops flashing,
the illuminated light on the
Battery Backup Box will go
out. Release the PAIR button.
The remote is now paired to
the adjustable base.
