manualshive.com logo in svg

ergoline ers2, Системное руководство

Поделиться
Скачать
ergoline ers2 Скачать руководство пользователя страница 47

8 Disposal

ers2 – 1-Channel ECG Telemetry System

45

201000401000 / Rev 04

8

Disposal

At the end of their service life, the product described in this manual and its accessories must not 
be disposed of as unsorted municipal waste but in compliance with the applicable local waste 
control regulations.

If you have questions regarding the disposal, please contact ergoline or its representatives.

The batteries have to be taken to a collection point. They need to be recycled.

NOTICE

Environmental impact

Electronic devices and the accessories contain metal and plastic parts. After the expiration of their 
useful life, the parts must be disposed of in compliance with the valid waste regulations to pre-
vent any environmental impact.
Once the service life of the ECG system has expired, it must be disposed of in compliance with the 
applicable local and national provisions. If you have any questions about the disposal of the 
device, please contact ergoline or one of the authorized ergoline representatives.

Содержание ers2





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды