manualshive.com logo in svg

ergoline ers2, Системное руководство

Поделиться
Скачать
ergoline ers2 Скачать руководство пользователя страница 20

2 Definitions

18 |

18

201000401000 / Rev 04

This side up
Indicates the correct position of the 1-channel transmitter on the adapter.

MR Unsafe
Indicates that the ECG system must not be used in the vicinity of MR scanners.

Correct washing at 40°C
Indicates that the maximum washing temperature for the chest belt is 40°C.

Do not tumble dry
Indicates that the chest belt must not be tumble dried after washing.

Do not bleach
Indicates that the chest belt must not be bleached.

Do not dry clean
Indicates that the chest belt must not be dry cleaned.

Do not iron
Indicates that the chest belt must not be ironed.

Indicates the size of the chest belt.

FCC Approval (USA only)
Indicates that the 1-channel transmitter and the receiver comply with part 15 
of the FCC rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired opera-
tion.

Follow instructions in accompanying documents
Read and understand the instructions for use before using the device or product. 
This is a "mandatory sign" identified by a white symbol on a blue background.

Rx Only
Please note that US Federal Law restricts the device to be used by a physician or 
on the order of a physician.

QR code
Readable with a QR code reader. Provides the following information: serial 
number or lot (batch) number, UDI number, and date of manufacture.

Caution
Consult accompanying documents.
There may be special warnings or precautions for the device that are not printed 
on the label. For further information on the safe use of the device, refer to the 
supplied documentation.

MR

Содержание ers2





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды