manualshive.com logo in svg

ergoline ers2, Системное руководство

Поделиться
Скачать
ergoline ers2 Скачать руководство пользователя страница 3

ers2 – 1-Channel ECG Telemetry System

1

201000401000 /Rev 04

ers2 – 1-Channel ECG Telemetry System

System Manual

201000401000 • Version 2020-09-24 / Rev 04 • English

This manual contains the instructions for use and the technical specifications of the 
ers2 – 1-Channel ECG Telemetry System. It was written with the utmost care. Should you 
nonetheless find details that do not correspond with the hardware or software, please let 
us know and we will correct the issue as soon as possible.

We reserve the right to modify the design and technical features of the device and are not 
bound by the information and illustrations provided in this manual.

All trademarks appearing in this document are trademarks of their respective owners. Their 
protection is acknowledged.

No part of this manual may be reprinted, translated or reproduced without the manufac-
turer‘s written permission.

This manual will not be automatically updated. Please contact the manufacturer for the 
latest document revision.

Содержание ers2





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды