ergoline ergoselect 1, Руководство оператора

Страница: 22 / 38

20 ergoselect 1
6 Operation
6.7 Manual
Use the softkeys on the right and left (
↑ ↓
) to position
the bar cursor on
Manual
and confirm the selection with
Select
.
In this operating mode the user controls the entire exercise
test by selecting the load levels.


PC Mode
Ergometry
Manual
Settings
Select
Figure 6 – 14: Main menu
The exercise test is started with the
Start
key, afterwards
the load can be set and changed with the +10 W and
–10 W keys (in increments of +/–1 W, +/–5 W, +/–10 W or
+/–25 W, as configured).
0
—
0
Watt min:sec /min
Start
Figure 6 – 15: Initial screen of a manual exercise test
6.8 Terminating an Exercise Test
The exercise test can be terminated manually at any time
with the
End
key located in the middle.
The load will immediately drop to 0 watt.
There is no recovery phase in the manual mode.
120
15:23
76
Watt min:sec /min
+10 W End –10 W
Figure 6 – 16: Display during the exercise test