ergoline ergoselect 1, Руководство оператора

Страница: 17 / 38

14 ergoselect 1 ergoselect 1 15
5 Setup and Mains Connection
5.6 Connecting the ECG Cable
The ergoselect 1 ergometers can be connected to electrocardio‑
graphs and PC‑based ECG systems of most manufacturers.
The ergoselect 1 ergometers are equipped with a digital interface.
The connection cable is plugged into the 9‑pole socket of
the connection panel (Port 1) or the USB port and secured
at the metal frame with an additional strain relief.
Figure 5 – 7: Connection for ECG recorder / PC ECG system
1
USB: PC connection via USB (virtual COM)
2 PORT 1: Digital connection
(remote control from PC or ECG recorder)
Note
Connection Cables
Use only connection cables approved by ergoline.
A special PC driver software, which can be obtained
from ergoline, is required for operation via the USB port.