ERGO-FIT VECTOR ABDOMINAL FLEXION Скачать руководство пользователя страница 101

Страница: 101 / 104

VECTOR KRAFT

Safety Information VECTOR Kraft Line

⊗

Do not start the machine before carefully reading this owner’s manual.

⊗

Only use the machine after performing a proper function test.

⊗

Before starting the exercise please check the power supply cord (T, T MED, CVT,

CVT MED only)

⊗

Wear only appropriate sportswear and footwear during training.

⊗

The machine may be used after instruction of a supervisor only. The machine

must not be used without the presence of a supervisor.

⊗

Never start training with the maximum strain. Increase its intensity slowly.

⊗

Check if the rests are secured before getting on the machine.

⊗

Never lean on the panel pc and do not make inappropriate movements.

⊗

Never leave children unattended with the machine.

⊗

Make sure that persons who stand close to the machine are not hit by moving

parts.

⊗

In case of nausea, dizziness, pain in the chest, limbs or joints, stop training

immediately and see a doctor.

⊗

If you have a cardiac pacemaker, orthopaedic disabilities or a health condition,

see your doctor before using the training machine.

⊗

When adjusting rests or restraints, please make sure to retighten them

properly.

⊗

Do not put your hands between the snap-on weights. Make sure that the dowel

pins are inserted completely into the borings and are not jammed.

⊗

Check the machine for damaged moving parts and paddings regularly (once per

week). If the machine is damaged, have it repaired immediately.

⊗

Do not hold your breath during training. Breathe out during the strain sequence

and breathe in during the relaxing sequence.

⊗

Start new power training exercises with a low strain. If you set the strain too

high in the beginning, you might get injured.

⊗

Note that physical fatigue reduces coordination and increases the risk of

injury.

⊗

Before training, check if all handling parts are locked properly or damaged.

⊗

Switch off the machine after the workout and disconnect it (T, T MED, CVT, CVT

MED only).

⊗

Only use the machine for the purposes it is designed for.

⊗

Please consider further safety and operational notices in this manual.

These safety precautions must be displayed where they are visible from the strength exercise

machine! All users of the machine must be informed of the dangers and safety regulations. The

manufacturer will not be liable for personal injury or material damage.

9 5

Содержание VECTOR ABDOMINAL FLEXION









































































































Результаты поиска

Содержание VECTOR ABDOMINAL FLEXION

Отзывы:

Похожие инструкции для VECTOR ABDOMINAL FLEXION

Бренды по названию

Популярные бренды

ERGO-FIT VECTOR ABDOMINAL FLEXION, Руководство пользователя

Результаты поиска

Содержание VECTOR ABDOMINAL FLEXION

Отзывы:

Похожие инструкции для VECTOR ABDOMINAL FLEXION

Бренды по названию

Популярные бренды