ERGO-FIT VECTOR ABDOMINAL FLEXION Скачать руководство пользователя страница 12

Страница: 12 / 104

Safety information

Safety information

Please read the following chapter carefully and respect all safety instructions before you

start using your workout equipment. Please keep this manual in a safe place in order to

pass it over to future owners if you sell your workout device.

For evidence of ownership, please complete the following form:

Model/series

__________________________________

Serial number

__________________________________

Date of purchase

__________________________________

You will need this information in case of warranty.

The following symbols designate important information

Caution!

This warning draws the attention to hazards that could

result in personal injury or death.

Warning!

This warning draws attention to hazards that could result

in property damage.

Tipp!

This hint contains important information and tips to

improve

operation.

2.1

What you need to know when using your training

machine?

⊗

Carefully read this manual prior to using your product.

⊗

It´s the owner´s responsibility to inform the users of all hazard warnings and

provide them with operating instructions.

⊗

Familiarize yourself with the machine before you start your workout.

⊗

For safety reasons inspect the power cord for signs of damage before each

use.

⊗

Switch off the machine after the workout and disconnect it.

⊗

Only use the machine after a proper function test (see chapter 6.3 for more

information). For your own safety and before every use, please check the

machine for damage (loose screws, worn parts, cords etc). If the machine is

damaged, do not use it before it is repaired.

⊗

In order to reduce risk of injury please wear appropriate clothes and footwear

for exercise.

⊗

In case of nausea, dizziness, pain in the chest, limbs or joints, stop workout

Содержание VECTOR ABDOMINAL FLEXION









































































































Результаты поиска

Содержание VECTOR ABDOMINAL FLEXION

Отзывы:

Похожие инструкции для VECTOR ABDOMINAL FLEXION

Бренды по названию

Популярные бренды

ERGO-FIT VECTOR ABDOMINAL FLEXION, Руководство пользователя

Результаты поиска

Содержание VECTOR ABDOMINAL FLEXION

Отзывы:

Похожие инструкции для VECTOR ABDOMINAL FLEXION

Бренды по названию

Популярные бренды