MI_STAR_EN.doc
SR Installation Manual EN
Indice : C
03/05/2019
6 / 15
ERECA SAS 75 rue d'Orgemont, 95210 SAINT GRATIEN France
Tel +33 1 39 89 76 23 www.ereca.fr
1.2.3 Analog AUDIO
1.2.3.1 Pinout
One D SUB 37 pin female socket provide the access to the 16 balanced analog AUDIO IN.
One D SUB 37 pin female socket provide the access to the 16 balanced analog AUDIO OUT.
SIGNAL
Socket
contact
D SUB 37
AUDIO
In/Out
Socket
contact
SIGNAL
AUDIO 1 +
1
1
20
19
37
20
AUDIO 1 -
AUDIO 2 +
2
21
AUDIO 2 -
AUDIO 3 +
3
22
AUDIO 3 -
AUDIO 4 +
4
23
AUDIO 4 -
AUDIO 5 +
5
24
AUDIO 5 -
GND
6
25
GND
AUDIO 6 +
7
26
AUDIO 6 -
AUDIO 7 +
8
27
AUDIO 7 -
AUDIO 8 +
9
28
AUDIO 8 -
AUDIO 9 +
10
29
AUDIO 9 -
AUDIO 10 +
11
30
AUDIO 10 -
GND
12
31
GND
AUDIO 11 +
13
32
AUDIO 11 -
AUDIO 12 +
14
33
AUDIO 12 -
AUDIO 13 +
15
34
AUDIO 13 -
AUDIO 14 +
16
35
AUDIO 14 -
AUDIO 15 +
17
36
AUDIO 15 -
GND
18
AUDIO 16 +
19
37
AUDIO 16 -
1.2.3.2 Audio option location
For units equipped with the 8 microphones gain block, the gain block is installed in
the “RX” unit.
The gain blocks are connected to channels 8 to 16.
Thru the web server each 8 to 16 input can be amplified with a gain ranging from 9 to 60 dB (3dB steps) with
or without Phantom power supply.
If the gain on a channel is not wanted the gain block could be totally bypassed and this input recovers the
+18 dBm max input level.
The phantom power capacity is 10mA for each channel.
Note: To setup the gains remember to log on the RX unit.
Caution: Beware of the input phantom power, after switching off the phantom power the 48Volts will still be
present for a significative amount of time on the inputs, time needed by the inputs capacitor to discharge.