background image

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX 

ercol.com

Wood Furniture

Wood displays different grain patterns depending on which way it is cut - for example, the ‘medullary ray’ 

which can appear on oak furniture is a mark of good quality timber - these are characteristics of the natural 

beauty of the wood. All timber surfaces will change colour and mellow over time. New furniture will initially 

vary in shade from items that have been previously purchased.

How to care for your wood furniture

Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth. Spillages should 
be wiped up as soon as possible. Spray polishes should be avoided as they can contain silicones which may 
spoil the furniture’s surface by building up over time. Use of cleaning materials containing abrasive compounds, 
acidic or caustic reagents and any bleaches containing oxidising reagents should be avoided as prolonged 
use may damage the lacquer surface. If sticky marks occur on the surface they can be removed with a dilute 

solution of warm soapy water. The area should be rubbed lightly and then completely dried immediately 

afterwards, before replacing any mats etc. Our furniture will endure most temperatures in the home but it is 
best to avoid placing furniture next to heat sources such as radiators or fires. Be particularly careful with solid 

wood as the lack of humidity caused by central heating can cause damage, such as warping.

Safety Instructions

Never drag furniture when moving it, always lift it. Take care when handling or moving the furniture as careless 
handling may cause damage or injury. No liability will be accepted for damage or injury caused by incorrectly 

installed furniture.

April

 2018 Issue 1

5

Ref: 1213 / 1360 & 1361 Bosco double / kingsize bed 

Содержание BOSCO 1360






Отзывы: