1. Push the threads (G) into the headboard and the footboard as shown below. Tighten the threads by hand
ensuring that there is approximately half of the thread still showing. Using the 12 x 25mm screws (M), attach
the two brackets (J) onto the headboard and the footboard using the pre-drilled holes, tighten with a phillips
screwdriver.
2. Ensure the holes in the side rails (C) are facing upwards, and you have the left and right rails (see page 2)
on the correct sides. With another person to hold the siderail, locate these side rails onto the protruding
threads on the headboard and footboard. As you do this, slide a half moon washer onto the thread when it
Repeat with the other 3 corners. When all four corners are in place, fully tighten with the spanner (I). Making
sure the holes in the centre rail are facing upwards, put the centre rail (D) into the two brackets (J). Secure it
in place using the 2 x nuts and 45mm bolts (L), and the 2 washers (K).
Step by step assembly instructions
3
Ref: 1213 / 1360 & 1361 Bosco double / kingsize bed
G
J
M
H
I
K
L
