![background image](http://html1.mh-extra.com/html/featherandblack/noah-single-bed/noah-single-bed_assembly-instructions_547725001.webp)
Noah Single Bed
Assembly Instructions
Pre-assembly Preparation
Please read th
ese instructions fully prior to assembly to familiarise yourself with the various stages of
construction. Carefully open all packs supplied and check the contents against the parts and fittings check list.
Do not destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
This item is heavy once assembled. Please try to assemble the item as close as possible to the point of use.
Take care when moving the item to avoid personal injury or damage to the product and always lift rather than
drag.
There are small components used in the construction of this bed as well as plastic foil packaging,
these should be kept away from young children whilst assembling your bed.
This product requires a minimum of 2 people to assemble.
Product Safety
All assembly fastenings should always be tightened properly and care should be taken to ensure that no fittings
are loose.
Periodically check and ensure that all components are in their proper position, free from damage, and that all
connectors are tight.
Once the bed is assembled, do not sit, stand or apply weight directly to the slats unless
the
mattress is in place.
We recommend a mattress size of 190cm x 90cm. The thickness of the mattress should not exceed the line
marker on the upper end when assembled as a bunk bed.
Warning: High beds and the upper bed of bunk beds are not suitable for children under six years of age due to
the risk of injury from falls.
Product Care
To clean, slightly moisten cloth with water and wipe surfaces. A damp cloth holds dust and prevents damage.
R
epeat with a dry, soft, lint-free cloth.
Do not use abrasives or cleaning products which may contain ammonia or
solvents
Tools Required:
Please use
a Phillips head screwdriver (not included) and the Spanner L (included to assemble the Noah single
bed.
If you require any advice during assembly please call our customer service team on 01243 380600.
1