1
4’, 5’ GLIDER
Step 1 (Attach arms to seat)
Align the front bolt holes. Insert a short bolt and washer through the upper hole on the front
of the arm brace and into the seat and tighten. Only finger tight. Once fully assembled tighten
everything up. Repeat this for the lower front hole. Repeat on the other side. Align the back
bolt holes. Insert a long bolt and washer through both the upper and lower hole of the back of
the arm brace and into the seat. Place a bolt and washer on the outside of the arm and push it
through the seat, but don’t push is all the way through. This will be where the back side of the
arm, seat and back connect. When the back is added, then the bolts with be pushed through and
tightened. Repeat on the other side.
EASY ASSEMBLY INSTRUCTIONS
