Ercogener 4408100066 Скачать руководство пользователя страница 43

Страница: 43 / 51

EG_GenPro425e_1103_UG_001_UK.docx

Page 43 / 51

Descriptions and non-contractual illustrations in this document are given as an indication only.

ercogener reserves the right to make any modifications.

Dct_427_02

5.4.1.2

The GenPro 425e contains the application ercogener EasePro _Vx

Example of display when the EasePro application is present inside the equipment

*********************************************************

EasePro Vx...

0000/01/01-00:00:00: EGM_INIT_SOFTWARE_RESET

0000/01/01-00:00:01: gprs_set_account: , , , 0, 0

0000/01/01-00:00:01: hist_restore_wr_idx: write_block=0, write_idx=0

0000/01/01-00:00:01: hist_restore_rd_idx: read_block=0, read_index=0

0000/01/01-00:00:01: hist_init: flash history: ids=-3

0000/01/01-00:00:01: hist_init: flash history_CFG: ids=-3

0000/01/01-00:00:01: hist_init: subscribe flash

0000/01/01-00:00:01: hist_restore_rd_idx: read_block=0, read_index=0

0000/01/01-00:00:01: hist_restore_wr_idx: write_block=0, write_idx=0

0000/01/01-00:00:01: READY

Send the command AT+EGM3

The modem returns the version of the library

+EGM3: genapi V...

In the case where no communication can be established with the modem:

▪ Check the RS232 connection between the DTE and the modem (DCE),

▪ Check the configuration of the COM port of the DTE

For more information about these AT commands and their associated parameters, see the

’

ercogener

document "Commands List ".

5.4.1.3

The GenPro 425e contains the application ercogener EaseIP _Vx

The

GenPro 425e

contains the application EaseIP _Vx.

Send the command ATI8. The modem returns the version (example of display)

EaseIP Vx...

For more information about these AT commands and their associated parameters, see the

ercogener

document EG_EaseIP "Commands List ".

5.4.1.4

The owner application

The

GenPro 425e

contains your application.

Set the RS232 port of the DTE according to your parameters (speed, data bits, parity and stop bit).

Check the display and the dialogue with the

GenPro 425e

according to your own characteristics.

Содержание 4408100066




















































Результаты поиска

Содержание 4408100066

Отзывы:

Ercogener 4408100066, Руководство пользователя, Страница: 43 / 51

Результаты поиска

Содержание 4408100066

Отзывы: