EG_GenPro2xe_1003_UG_005_UK
Page 7 / 63
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
Avertissement
•
Erco&Gener advises to read carefully all the documents concerning the GenPro 2xe (User Guide,
Application Notes, Command List).
•
ERCO & GENER cannot be held responsible for:
-
The problems due to an inappropriate use of the GenPro 2xe .
-
The problems due to a wrong configuration
- The problems due to a wrong use of an embedded software application developed or
supplied by a third party.
-
The dysfunctions due to the absence or a bad coverage of the GSM, GPRS networks.
-
The dysfunctions if the product is used for the watching of physical persons where human
life is engaged.
•
ERCO & GENER reserves the right to modify the functions of its products " GenPro 2xe " and
"EasePro" without previous notice.
- In order to avoid any risk of electrocution, do not open the casing.
- For any functioning, the casing must be closed.
- No internal part can be repaired by the user. The
GenPro 2xe
must be returned to the factory for any
repair.
- The
GenPro 2xe
must be placed in a normally ventilated area, out of sources of heat.
- In order to guarantee the electromagnetic compatibility, the length of the serial cable, the supply cable and
the inputs/outputs cable must not exceed 3 meters.
- The
GenPro 2xe
must not be connected directly to the mains supply; a voltage adapter must be used.
SCRAP THE WORN BATTERIES ACCORDING TO INSTRUCTIONS.
