Erbauer ERB383WCH, Оригинальное руководство пользователя

Страница: 8 / 28

j) Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety glasses.
As appropriate, wear dust mask, hearing protectors, gloves
and shop apron capable of stopping small abrasive or
workpiece fragments.
The eye protection must be capable of
stopping lying debris generated by various operations. The dust
mask or respirator must be capable of iltrating particles generated
by your operation. Prolonged exposure to high intensity noise may
cause hearing loss.
k) Keep bystanders a safe distance away from work area.
Anyone entering the work area must wear personal protective
equipment.
Fragments of workpiece or of a broken wheel may ly
away and cause injury beyond immediate area of operation.
l) Hold the power tool by insulated gripping surfaces only,
when performing an operation where the cutting accessory
may contact hidden wiring or its own cord.
Cutting accessory
contacting a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
m) Position the cord clear of the spinning accessory. If you
lose control, the cord may be cut or snagged and your hand or
arm may be pulled into the spinning wheel.
n) Never lay the power tool down until the accessory has come
to a complete stop.
The spinning wheel may grab the surface
and pull the power tool out of your control.
o) Do not run the power tool while carrying it at your side.
Accidental contact with the spinning accessory could snag your
clothing, pulling the accessory into your body.
p) Regularly clean the power tool’s air vents.
The motor’s fan will
draw the dust inside the housing and excessive accumulation of
powdered metal may cause electrical hazards.
q) Do not operate the power tool near lammable materials.
Sparks could ignite these materials.
r) Do not use accessories that require liquid coolants. Using
water or other liquid coolants may result in electrocution or shock.
Kickback and related warnings
Kickback is a sudden reaction to a pinched or snagged rotating
wheel. Pinching or snagging causes rapid stalling of the rotating