Erbauer ERB383WCH, Оригинальное руководство пользователя

Страница: 21 / 28

1500W WALL CHASER
5. CONNECTING DUST EXTRACTION (See Fig.
13)
Your wall chaser is equipped with a dust extraction
adapter, which is designed for collect dust task.
Make sure it is tightened securely on the dust
outlet. Then connect the hose of a vacuum
cleaner.
First please turn on the vacuum cleaner, then turn
on the wall chaser. If you stop cutting, irst turn off
the wall chaser, then turn off your vacuum cleaner.
6. SWITCHING ON/OFF (See Fig. 14)
The On/Off switch is incorporated with a safety
button to avoid accidental starting. To start the wall
chaser irst push the safety button forward, then
press the On/Off switch. To turn off the grinder
simply release the On/Off switch.
Important note:
Cutting of channels in materials such as concrete,
masonry and paving, without the use of WATER,
with a guide wheel.
7. REPLACING CARBON BRUSHES (See Fig.
15)
Completely unscrew the cap of carbon brush and
pull out the carbon brush. Check the length of the
brush and replace if under 3mm. When brushes
need replacement always renew both brushes,
even if one is still more than 3mm long. Put the
carbon brush into the body. Cover the cap of brush
and screw down. Check the tool is working before
use, allow it run for a few minutes to enable the
brushes to be stable.
Fig. 14
Fig. 13
Fig. 15